Delete a task in sddc manager
In sddc manager click on the task Get the id in the url ssh to sddc manager Login as vcf Su Run the following with the id obtain from above…
In sddc manager click on the task Get the id in the url ssh to sddc manager Login as vcf Su Run the following with the id obtain from above…
Prechecks Take an NSX-T Manager backup via SFTP – this will backup the edges as well. Ensure NSX is healthy. NSX UI, System > Fabric > Nodes > Edge Transport…
Now supports more than two nics hosts need to commissioned into sddc manager Login to sddc manager Under inventory, click workload domains, click your workload domain, click clusters, click the…
-Configure network for the 5 esxi hosts via vsphere client- vlan, ip, subnet mask, gateway, dns, fqdn-make the virtual machine network same vlan as management-mark disks as all flash if…
example - The ip address below is the nsx-t manager vip and id was obtained from the nsx-t manager gui for the edges. I used postman. #State should show edge…
This process is to convert the build sheet you use for the vcf bring up during a vcf deployment from the excel format .xlsx to .json. You can do this…
#Verify that the ESXi host is in TPM mode esxcli system settings encryption get #If the Mode appears as NONE, you must enable the TPM in the firmware of the…
The below configuration is for VLC VMware Cloud Foundation configuration for the 172.16.x.x Network for Vyos. I decided to build another VCF instance network in my lab so I can…
You get the following error when you try to upgrade the esxi hosts in SDDC Manager. esxi-3 – The ESXi cluster is not healthy (green) due to : vSphere HA…
When I tried to upgrade within sddc manager I have the following message “SDDC Manager error – Update not possible while vcenter is in failed state.” I confirmed nothing is…