Fix a NSXT edge mismatch via api (tested on NSX-T 3.2)
example - The ip address below is the nsx-t manager vip and id was obtained from the nsx-t manager gui for the edges. I used postman. #State should show edge…
example - The ip address below is the nsx-t manager vip and id was obtained from the nsx-t manager gui for the edges. I used postman. #State should show edge…
I can’t ping my virtual machines on my NSX-T overlay network. I noticed that my host overlay TEP doesn’t get it’s DHCP ip’s, instead they are getting a default of…
This blog I am going to have my configuration for my vyos, my edges, avn. I hope this will help if you want a vyos box instead of the cloud…
NSX Manager is a key component of the NSX suite, responsible for centralized management and control of NSX resources. In this blog post, we will walk you through the process…
I was recently working with a customer who was looking for a design and deploy of a multi site NSX environment. The premise of the design was simple at it’s…
The network information for the previous NSX-T series from Part 1 to 7. NSX-T Managers nsxtmgr01.vmware.local – 172.168.1.134/24 nsxtmgr02.vmware.local – 172.168.1.135/24 nsxtmgr03.vmware.local – 172.168.1.136/24 nsxtmgr.vmware.local (VIP) – 172.168.1.133/24 Dns –…
Description A segment is a logical switch that VMs can connect to. A tier-1 gateway routes traffic between segments. A tier-0 gateway connects tier-1 gateways to a physical router so…
Description Edge nodes do things like North/South routing, load balancing, DHCP, VPN, NAT among other things. Key information VLAN 300 is management network. VLAN 63 is my edge TEP network.…
1. Create transport zone for overlay and vlan 2. Create two uplink profiles for edge and hosts 3. Create Host Node profile and assign to ESXi cluster Key information one…
You can use existing vds or create a new one, MTU has to be 1600 or higher. It will be used for your overlay network. I will use two port…