NSX Overlay stops working – Troubleshooting and fix (can’t ping my virtual machine)
I can’t ping my virtual machines on my NSX-T overlay network. I noticed that my host overlay TEP doesn’t get it’s DHCP ip’s, instead they are getting a default of…
I can’t ping my virtual machines on my NSX-T overlay network. I noticed that my host overlay TEP doesn’t get it’s DHCP ip’s, instead they are getting a default of…
When creating a new environment in vrslcm (lifecycle manager) for vidm (identity manager) you get an error message “failing to fetch necessary information” You need to edit the timer and…
Error message Remediation Message: Check if the Jumbo frames between SDDC Manager network and the vRealize Suite Lifecycle Manager network are enabled and if the required ports listed at https://ports.esp.vmware.com…
delete interfaces ethernet eth0 address dhcp set service ssh port 22 set interfaces ethernet eth0 vif 4 address '192.168.1.1/24' set interfaces ethernet eth0 vif 4 description 'vlan 4 mgmt my…
This blog I am going to have my configuration for my vyos, my edges, avn. I hope this will help if you want a vyos box instead of the cloud…
$esxipassword = “VMware123!” Connect-VIServer 10.0.0.110 -User root -Password $esxipassword Set-VMHostAccount -UserAccount root -Password VMware123!
My snapshot Code below ! # vCenter Server configuration $vcenter = “vcenter.vmware.local” $vcenteruser = “administrator@vsphere.local” $vcenterpw = “VMware1!” $vmname = “backup” #Connect to the vCenter server defined above. Ignore certificate…
More search queries examples. https://docs.vmware.com/en/VMware-vRealize-Network-Insight/6.9/com.vmware.vrni.using.doc/GUID-176F5A09-2325-41EA-A315-58738CB4F117.html Example searches • vm by vlan where vlan = 10 • vm group by L2 network • L2 network, vlan, ip address, default gateway of…
Below is a list of basic commands you can run via consoleuser and screen shots. show-config support-tunnel status show-version hostname show custom-cert list custom-cert display support-bundle ? support-bundle create disk-usage…
Do the following beforehand. Certificate added or create to vrslcm Locker password added for vrni – admin@local, support, consoleuser vrslcm supported for vrni version, in support pack in vrslcm settings…